Marina launch guide
Erieau Marina Launch
Short answer: What to do before launching at Erieau Marina Launch: listed as free, and the waterway here near Chatham-Kent, ON changes fast — so confirm the launch still takes your trailer size, use the live directions link on this page, and have PFDs, drain plug, VHF and fuel already ready before you tow.
Published May 12, 2026 by Ontario Boat Ramps · Updated May 12, 2026
Quick facts
| Field | Value |
|---|---|
| Waterway | lake erie |
| Location | Chatham-Kent, ON |
| Fee status | Listed as free |
| Dock type | Concrete |
| Trailer spots | Not listed on this record. |
| Vessel types | Not listed on this record. |
- Location
- Chatham-Kent, ON
- Waterway
- lake erie
- Fee status
- Listed as free
Launch-day steps
Plan, confirm, inspect, gear check — 4 steps, about 45 minutes of preparation before you tow.
- 1
Plan the route to Erieau Marina Launch with a live navigation aid
Start from the directions link on this page rather than a saved shortcut. The launch sits on an Ontario waterway near Chatham-Kent, ON, so a live route is more reliable than an old pin.
- 2
Confirm the fee status is listed as free
Fee status on this record is listed as Listed as free. Confirm at the entrance on busy weekends — marina-side fees and park-side charges can stack.
- 3
Inspect the launch surface for your boat and trailer
Dock type on this record is Concrete. Match it to your transom height and trailer tongue: wooden floating docks can ride up with boat wake, and gravel banks are slower to load than concrete or aluminum.
- 4
Gear check before launch: PFDs, drain plug, VHF, fuel
PFDs within reach, drain plug confirmed, VHF battery fresh, trailer lights working, fuel verified, and a clear return plan agreed on with the driver.
Before you tow to Erieau Marina Launch
- Confirm current access, fee, and parking details for Erieau Marina Launch before busy weekends.
- Check wind, weather, fuel, drain plug, lines, PFDs, trailer lights, and a return plan.
- Use the directions link from this page instead of relying on an old marina pin.
- If your boat numbers or name lettering are faded, fix them before your next launch day.
FAQ — Erieau Marina Launch
What should I confirm before towing to Erieau Marina Launch?
Before you go, confirm current access, the fee status (Listed as free), parking availability, and whether the launch can handle your boat and trailer. Busy weekends fill up quickly, and the waterway conditions near Erieau Marina Launch change fast, so a short check the morning of your trip saves a wasted run.
How do I get from home to the Erieau Marina Launch launch correctly?
Use the directions link from this page, which points at the recorded coordinates for the launch. Old marina pins and saved shortcuts often point at the marina office or a different point on the shore, so navigate from this page every time.
What gear should be ready before I launch a boat?
PFDs within reach of every person onboard, the drain plug in place, a working VHF radio and fresh battery, trailer lights intact, fuel verified, and a clear return plan. For open-water routes, add a float plan and check the marine forecast before you leave shore.
Registration number and hull graphics
Heading out from your marina? The name-and-number set is what a launch-day inspection looks at first.
- 3 in, 4 in and 6 in letters, matched to your hull
- Standard or engineer-grade reflective finish
- CAD $59.99–$214.99, shipped
Related boating links
Ramp profile
Open the ramp record for coordinates and launch details.
Sponsor this audience
Reach launch-day boaters with a clearly labelled zone sponsorship.
All Ontario ramps
Browse every public ramp on an Ontario waterway by region and fee.
Family launch plan
A printable launch-day checklist for kids and first-timers.